To bring up the Display Settings menu, select "Settings" -> "Display Settings" from the Quick Menu that displays before each race. From there you can fine-tune your display-related settings and racing views. The Display Settings are as follows:

Race Display
・Show Race Info
Toggle the information displayed onscreen during races.

・Show Drivers List
Configure display rules for the driver list. You can choose driver names and car names.

・Car Name Indicator
Choose what information to display above cars during races.

・Display Driver Names (Online Races)
Configure display rules for other driver names during online races and meets.

・Ghost Display
The "ghost" feature involves displaying the replay of the best lap time for a given track in the form of a transparent car which drives along the track at the same time as you. Attempting to follow the ghost around the track is a good way of improving your driving skills. Use this option to switch the ghost on or off.

・ Display Settings Assistant
Configures your Display Settings when you launch the game for the first time. This will reset your current settings.

Image Settings
Bring up the "Image Settings" to adjust the following options:

-Exposure
Adjust the brightness of the screen during races.

-Saturation
Adjust the vividness of colors during races.

View
・Adjust Cockpit View
In addition to adjusting the height and depth of the viewpoint when driving in cockpit view, you can also choose the orientation and degree of wobbling. These options can only be adjusted by pressing the options button while driving, and selecting "Settings".

・Adjust Chase View
Make adjustments to the chase view camera. This option can only be adjusted by pressing the options button while driving, and selecting "Settings".

-Chase View Camera Sensitivity: Adjust the sensitivity of the camera in response to the car's movements. The higher this value, the less sensitive the camera, meaning it will respond more slowly to the car's movements.

-Chase View Rotation Center Offset: Set the camera's rotation center. If the value is "0", then the rotation center will be the center of the car itself, and the camera will swing around to match the car's movements. Increasing the value will move the rotation center towards the tail of the car.

-Chase View Type: Select the position of the camera in chase view.